|
click
here Download entire detailed PDF Measuring Guide
click here |
[HOME] Tom Wood's Custom Drive Shaft's [HOME]
Order/Quote Your Drive Shaft
|
If you have not found pricing for your drive shaft
from a particular link on our web site, have other questions or if you would
like to place an order, you will need to
contact us via E-mail, Fax or
telephone. With very few exceptions, we do not build drive shafts by application but rather by specification. While we are often familiar with the universal joint sizes and the type of drive shaft that a particular vehicle may use, in order to quote or build, we may need a little dimensional information. We believe there are down sides to getting "too much" drive shaft, beyond unnecessary expense. But certainly we need to make sure that whatever we send to you, will work. Please take a look at our measuring guide. We think you’ll find it simple enough to follow. We would recommend that you print and save for easy reference. If this is a custom application such as a custom built, tube frame, rock crawler or any other vehicle with a substantial lift, It is also helpful to know some measurements for the slopes of the transfer case differential and drive shaft. A simple method for obtaining this information can be found at this link. With this information we're sure we can get drive shafts to you that will work and work well for a very long time. |
You may want to print out and
use the worksheets above to order your drive shaft.
Then call or email
us your questions.
Step
1
SELECT THE TYPE OF DRIVE SHAFT YOU REQUIRE
| Type A - Double Cordon (CV) Type B - Standard Slip (2 joint) Type C - Reverse Slip (2 joint) |
 |
Need more info, call or email us! |
|
Step 2
DETERMINE ATTACHMENT
TYPE REQUIRED ON EACH END
 |
 |
 |
|
 |
|
|
| |
|---|---|
|
Need more info, call or email us!
Step 3 Need more info, call or email us!
Free Shipping - click here for more
information | Tom Wood's Custom Drive Shafts | Copyright © 1999-2010 Disclaimer |
